manualshive.com logo in svg

Lightware UBEX-MMU-X200, User Manual, Page: 102 / 253

Share
Download
Lightware UBEX-MMU-X200 User Manual Download Page 102

 

8. Software Control - Lightware Device Controller 

series – Matrix Application Mode – User's Manual 

102

 

8. Software Control - Lightware Device Controller 

series – Matrix Application Mode – User's Manual 

102

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

Signal Info

All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section. 

The 

signal bandwidth

 and the 

bandwidth limit reached

 indicators can also be checked in this panel.

Related Audio Info

Information (presence, audio type, sampling frequency) of the embedded audio is available in the related 

audio info section.

Tools

 

▪

Frame Detector

 - The tool displays the frame information of the transmitted stream after a possible 

rescaling / frame rate conversion.

HDMI Output Ports

Clicking on the HDMI out 1 or 2 panels opens the properties of the output ports. The most important signal 

information and settings are available from the panel.

Endpoint tab of the Device properties window - Receiver - Output port properties

Source MUX Selector

The source multiplexer (

Source MUX

) makes available routing more different source signals to the HDMI 

output ports. See more details about this function in the 

Receiver Mode 

section. 

#mux #sourcemux #new

Click on the MUX menu to expand the source MUX selector.

ATTENTION! 

The audio crosspoint settings always follow the source MUX settings of the video layer and 

the MUX settings cannot be set in the audio layer.
TIPS AND TRICKS: 

The source of the output port can be also selected without expanding the MUX menu.

HDMI Out 1

 

▪

Stream 

- The signal source of the output 

port is the stream coming from the 
remote device.

 

▪

HDMI in 1

 - The signal source of the output 

port is the stream of the local input port of 

the receiver. The HDMI in 1 port panel will 
be available when selecting this option.

HDMI Out 2

 

▪

Stream 

- The signal source of the output 

port is the stream coming from the 
remote device.

 

▪

HDMI in 2

- The signal source of the output 

port is the stream of the local input port 

of the receiver. The HDMI in 2 port panel 
will be available when selecting this option.

 

▪

Copy

 - The device is able to copy the signal of the HDMI out 1 port. This is the COPY function.

INFO: 

The Copy function is available only on the HDMI out 2 port.

 

 

Summary of Contents for UBEX-MMU-X200






























































































































































































































































Reviews:

No comments