8. Software Control - Lightware Device Controller
series – Matrix Application Mode – User's Manual
99
8. Software Control - Lightware Device Controller
series – Matrix Application Mode – User's Manual
99
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The
signal bandwidth
and the
bandwidth limit reached
indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪
- The tool displays the frame information of the original stream coming from the input
port before a possible rescaling / frame rate conversion.
SFP+ Link Panels
Clicking on the SFP+ Link 1 or 2 panel opens the properties of the SFP+ connections. The most important
signal information and the parameters of the SFP are available from the panel.
#sfp
ATTENTION!
If the
icon appears that means incompatible optical transceiver module is installed to the
endpoint device (SFP optical module (1 GbE) instead of SFP+ module (10 GbE).
Link Aggregation Status Indicator
Icon
Description
SFP+ connection is established successfully and the link aggregation is working
successfully.
No connection is established between the SFP+ links.
INFO:
You can find possible causes and solution suggestions in the
chapter in the case
of no connection or link aggregation problems.
Analog Audio Input Port Properties Panel
DIFFERENCE:
Only the UBEX-PRO20-HDMI-F110 model has built with analog audio input port.
Clicking on the Analog in panel opens the properties of the port properties. The most important signal
information and settings are available from the panel.
#analogaudio #volume #balance #gain
Endpoint tab of the Device properties window - Transmitter - Analog audio input port properties
Settings and Tools
▪
Stream naming
;
▪
Volume
: sets the input volume (attenuation) between 0% (-95.62 dB) and 100% (0 dB). Clicking on the
icon results -1%, the
icon r1% in the volume setting. The default value is 100%.
▪
Balance
: sets the balance between -100 (total left) and 100 (total right). Clicking on the
icon results
-1, the
icon r1 in the balance setting. The default value is 0 (center).
▪
Gain
: sets the gain between -12 dB and 35 dB. Clicking on the
icon results -1 dB, the
icon results
+1 dB in the gain setting. The default value is 0 dB.