6. UBEX Concept
series – Matrix Application Mode – User's Manual
65
6. UBEX Concept
series – Matrix Application Mode – User's Manual
65
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
6.3.6. The Difference between the Image Positions of the Scaler
The following section helps to understand how the image position settings of the scaler works. Three
different image positions are available:
stretch
,
fit
and
center
.
ATTENTION!
The scaler settings are available on the
HDMI in 1
port of the transmitter and the
HDMI out 1
port of the receiver/transceiver operation modes only.
The aspect ratio of the original stream and the sink device are different in the following examples.
Stretch
The aspect ratio of the stream is distorted because it is adjusted to the aspect ratio of the sink.
Fit
The picture is adjusted to the resolution of the sink and the aspect ratio of the stream is kept, thus, the whole
picture will be displayed without cropping. The scaler fills the extra image part with black pixels.
Center
The scaler crops the center part of the stream with the resolution of the sink.