7. Software Control - Lightware Device Controller
Hybrid Modular Matrix Switcher series – User's Manual
52
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
7.6.
Audio Port Properties Windows
7.6.1.
Digital Audio Input Port Properties
DIFFERENCE:
The following panel is available only when a
MX2M-4HDMI20-IB
,
MX2M-4OPTJ-IB
or
MX2M-DH-4DP12-IB
board is installed in the matrix frame.
Clicking on a digital audio input port
icon results opens the Port properties.
The most important signal information
and settings are available from the
panel.
#audio #hdmi #optj #displayport
#dp
Port Tab
Available Settings and Tools
▪
Port naming
▪
Mute/Unmute switcher
#mute
#unmute
▪
Lock/Unlock switcher
#lock
#unlock
▪
Switch to all button
: clicking on the
button results the selected input
stream is switched to all output
ports.
#switch
▪
Audio signal related information;
▪
Restore
button.
Board Tab
The most important information about the I/O board is available on the tab like the type of the board and the
status of board.
7.6.2.
Digital Audio Output Port Properties
DIFFERENCE:
The following panel is available only when a
MX2M-4HDMI20-OB
or
MX2M-4OPTJ-OB
board is
installed in the matrix frame.
Clicking on a HDMI or OPTJ output port
icon results opens the Port properties.
The most important signal information
and settings are available from the
panel.
#audio #hdmi #optj
Port Tab
Available Settings and Tools
▪
Port naming
▪
Mute/Unmute switcher
#mute
#unmute
▪
Lock/Unlock switcher
#lock
#unlock
▪
Audio source
:
#embedder
–
HDMI: the original embedded
audio is transmitted with the
stream. When the crosspoint
connection is changed on the
Video layer, the embedded
audio will be changed as well.
–
Audio layer: the audio signal
is selected from the Audio
layer.
–
OFF: audio signal is disabled.
▪
Mapping channels for Audio layer to the output
: the embedded audio signal can be 2-channel LPCM or
compressed (non-HBR) audio signal only. There are two possibilities in case of audio signal embedding:
–
If the selected signal includes more than two audio channels, the user can select the two channels
which are desired to transmit.
–
If the selected signal is compressed (non-HBR) audio, it can be embedded to the video stream
without any further action.
#mapping #channelmapping
▪
Restore
button.
Board Tab
The most important information about the I/O board is available on the tab like the type of the board and the
status of board.
