Lightware MX2M-FR24R, User Manual

Page: 38 / 126

5. Hybrid Modular Matrix Concept Hybrid Modular Matrix Switcher series – User's Manual 38
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
5.1.2. Video Signal Transmission - Example
The Concept
The matrix frame is installed with seven different type of I/O boards:
I/O board
Connection
interface
Signal
direction
Connected device
IB
MX2M-4HDMI20-IB HDMI Input Blu-ray player
MX2M-DH-4DP12-IB DisplayPort Input MacBook
MX2M-4OPTJ-IB
Multimode fiber
optical
Input
4K PC over a HDMI20-OPTJ-TX90 fiber
optical transmitter
OB
MX2M-4HDMI20-OB HDMI Output 4K TV
MX2M-4OPTJ-OB
Multimode fiber
optical
Output
Wall display over a HDMI20-OPTJ-RX90
fiber optical receiver
The video signals of the input boards can be routed to any ports of the output boards. The video crosspoint
settings can be set by four different methods:
▪
Front panel buttons
- see the details in the Switching Operations section;
▪
Built-in website / Lightware Device Controller (LDC) software
- see the details in the Crosspoint Menu section;
▪
LW3 protocol commands
- see the details in the Video Switching and Crosspoint Settings section.
Available Video Related Settings
The following settings and options are available for the video stream input:
MX2M--4HDMI20-IB
and
MX2M--4OPTJ-IB
boards:
▪ Input port HDCP capability setting
MX2M-DH-4DP12-IB
board:
▪ Sampling pattern conversion to 4:2:2 or 4:2:0
▪ Color depth conversion to 8 bit per channel
▪ Input port HDCP capability setting
The following settings and options are available for the video stream output:
▪ Sampling pattern conversion to 4:2:2
▪ Input port HDCP capability setting
▪ Audio stream embedding setting
   