7. LW2 Programmers' Reference
MX2-HDMI20 series – User's Manual
72
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
8.4.4.
View the Connection of an Output Port
See the connected input port number of an output port.
Command and Response
ȩ
{?
<out>
}
Ȩ
(O
<out>
• I
<input>
)CrLf
Example
ȩ
{?1}
Ȩ
(O01 I03)
Input 3 is switched to output 1.
8.4.5.
View Connections of all Outputs
Viewing the output’s connection results in different response length, because it depends on the device.
Command and Response
#crosspoint
#switch
ȩ
{VC•
<layer>
}
Ȩ
(ALL
<layer>
•
<O01>
•
<O02>
)CrLf
Parameters
O01 shows the corresponding output’s connection state.
Identifier
Parameter description
Parameter values
<layer>
Signal type of the layer
A:
audio layer
V:
video layer
AV:
audio & video layer
State letters
Letter
State
Example
L
Output is locked
L01
M
Output is muted
M01
U
Output is locked and muted
U01
Example
ȩ
{VC AV}
Ȩ
(ALLA)
Ȩ
(ALLV M01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 )
8.4.6.
View Mutes on all Outputs
Displays the mute states on all outputs.
Command and Response
ȩ
{VM}
Ȩ
(MUT
<out>
)CrLf
Parameters
All
<out>
indexes are one digit numbers, showing the mute state for the corresponding output. If
<out>
equals 0 the output x is unmuted. If
<out>
equals 1, the output x is muted.
Example
ȩ
{VM}
Ȩ
(MUT 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 )
Output 1 and 7 is muted, the other outputs are not muted.
8.4.7. Mute Specified Output
Mute the
<out>
output. The output signal is turned off.
Command and Response
#mute #lock #unmute
#unlock
ȩ
{#
<out>
}
Ȩ
(1MT
<out>
)CrLf
Example
ȩ
{#01}
Ȩ
(1MT01)
ATTENTION!
Muting does not change the state of the crosspoint but disables the output itself. This way
the last connection can be easily restored with an unmute command. Switching a muted output does not
unmute the output.
INFO: Muting does not change the crosspoint’s state but disables the output itself. This way the last
connection can be easily restored with an unmute command.
INFO: Switching a muted output does not unmute the output.
