3. Front Panel Control
MMX8x4-HT series – User's Manual
21
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
3.2.2.
Ports Menu
When entering the menu the available video input and output ports are listed. The
icons display information about the port and the video signal (see below table).
Select the desired port and enter to see the submenu.
Grey
icon
Description
White
icon
Description
Source/sink is
not
connected
Source/sink is
connected
No audio signal in the
video stream
Audio is embedded in
the video stream
Signal is
not
present
Signal is present
Signal is
not
encrypted
with HDCP
Signal is encrypted
with HDCP
The port is unmuted
The port is muted
Video Status Submenu for Input Ports
The most important properties of the chosen input port can be checked in this
submenu:
Parameter
Input port
+5V present
Present/ Not present
Signal Present
Present/ Not present/Unknown
HDCP Status
Encrypted/ Not encrypted/Unknown
Embedded Audio
Present/ Not present/Unknown
Pixel Clock (MHz)
No signal/ [x] MHz
Active Resolution
Unknown/ No signal/
[x]
x
[y][i\|p][f]
Total Resolution
Unknown/ No signal/
[x]
x
[y]
Video Settings Submenu for Input Ports
#hdcp
▪
HDCP Enable (Disabled / Enabled)
Video Status Submenu for Output Ports
The most important properties of the chosen output port can be checked in this
submenu:
Parameter
HDMI OUTPUT
Hotplug detect
Present/ Not present
Signal Present
Present/ Not present/Unknown
HDCP Status
Encrypted/ Not encrypted/Unknown
Embedded Audio
Present/ Not present/Unknown
Pixel Clock (MHz)
No signal [x] MHz
Active Resolution
Unknown/ No signal
[x]
x
[y][i\|p][f]
Total Resolution
Unknown/ No signal/ [x]
x
[y]
Video Settings Submenu for Output Ports
#signaltype #hdcp
▪
Signal type (Auto / DVI / HDMI)
▪
+5V Enable (Always on / Always off / Auto)
▪
HDCP Mode (Auto / Always on)
