3. Front Panel Control
MMX8x4-HT series – User's Manual
19
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
3.1.
Status LEDs
LIVE
FRONT
green
blinking slow
The unit is on and operates properly.
green
blinking fast
The unit is in bootload mode.
off
The matrix is out of operation.
POWER
FRONT
green
on
Power LED indicates that the unit is powered on.
off
The matrix unit is NOT powered or out of operation.
MMX8x4-HT400MC and MMX8x4-HT420M models
48V
REAR
red
on
Phantom power is turned on.
off
Phantom power is turned off.
TPS LEDs
REAR
PoE LED
off
Remote power (PoE) is inactive, device is powered locally.
amber
blinking (1x) Refers to low signal resistance.
amber
blinking (2x) Refers to high signal resistance.
amber
blinking (5x) Indicates an overload fault.
amber
on
Remote power is active.
TPS link LED
off
No TPS link between the transmitter and receiver.
green
blinking
Device is in low power mode or Ethernet fallback mode.
green
on
TPS signal is present.
3.2.
Front Panel LCD Menu Operations
The front panel has a color LCD that shows the most important settings and parameters structured in a
menu. The jog dial control knob can be used to navigate between the menu items or change the value of a
parameter. The knob can be pressed to enter a menu or edit/set a parameter.
Parameter Selection
The
blue
colored line means the selected menu/parameter, the
green
one means
the current setting.
TIPS AND TRICKS: The faster you rotate the jog dial, the faster the parameter list
is scrolled.
System Settings
Network
RS-232
Front
panel
Device Info
Factory
Defaults
Reset
Device
Bootload Mode
Ports
I,O
Video
Status
Video
Settings
EDID
View
Switch
Save
Health
Operation
Temperatures
Voltages
Crosspoint
Switch
View
