1. Introduction
MMX8x4-HT series – User's Manual
11
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
Special Audio Input Block for Microphone and Line-in
Special Audio Input block with input ports for microphone and line-in. The built-in sound
mixer allows for free mixing of the microphone, the line-in and the de-embedded audio.
Relay
Controllable relay modules up to 30V, 1A support.
GPIO Control Port
6 GPIO pins operating at TTL digital signal levels and can be controlled with both LW2 and
LW3 commands.
Remote Power
The MMX8x4-HT420M matrix is PoE-compatible. Power over Ethernet (PoE) describes a
standardized system which pass electric power along with data on twisted pair Ethernet (CAT)
cabling. This allows a single cable to provide both data connection and electric power to remote
devices.
1.4.4. MMX8x8-HDMI-4K-A-USB20
USB Functionality
#new
MMX8x8-HDMI-4K-A-USB20 has unique USB functions allow seamless integration in Unified
Communication and small Video Conference rooms. The ”USB 5V Host Detect” function
recognizes when a USB cable is connected.
GPIO Control Port
6 GPIO pins operating at TTL digital signal levels and can be controlled with both LW2 and
LW3 commands.
1.5.
Optional Accessories
The following not-supplied accessories can be purchased and used with the device; please contact
#new
RAP-B511, Room
Automation Panel
TBP6, Button panel
