Lightware HDMI-TPS-RX220AK, User Manual, Page: 34 / 118

5. Software Control - Lightware Device Controller HDMI-TPS-RX220AK – User's Manual 34
Applied firmware package: v1.4.0 | LDC software: v2.4.0b3
5.5.2. Video - HDMI In 2
This is the HDMI video input signal of
the receiver. Clicking on the port icon
results opening the settings panel
appearing in a pop-up window. You
can check the status of the line, signal
info and current emulated EDID.
Available Settings and Information:
▪ Port name: a unique name can
be set for the port.
▪
Mute/Unmute
port;
▪
Lock/Unlock
the port;
▪
HDCP setting
(enable / disable);
▪ Port status information;
▪ Signal information;
▪ Frame Detector ;
▪ CEC Controller ;
▪ Emulated EDID information;
▪ Reloading Factory Default
Settings .
5.5.3. Video - HDMI Out 1 and 2
These are the video output signals of
the receiver. Clicking on the port icon
results opening the settings panel
appearing in a pop-up window. You
can check the status of the line, signal
and display info.
Available Settings and Information:
▪ Port name: a unique name can
be set for the port.
▪
Mute/Unmute
port;
▪
Lock/Unlock
the port;
▪
Signal type
: Auto, DVI, or HDMI;
▪
HDCP mode
: Auto or Always;
▪
Power 5V mode
: Auto, Always on,
or Always off;
▪ Port status information;
▪ Signal information;
▪ Frame Detector ;
▪ CEC Controller ;
▪ Autoselect Feature ;
▪ No Sync Screen (Test Pattern)
function;
▪ Display information;
▪ Reloading Factory Default
Settings .
   