Lightware HDMI-TPS-RX220AK, User Manual, Page: 32 / 118

5. Software Control - Lightware Device Controller HDMI-TPS-RX220AK – User's Manual 32
Applied firmware package: v1.4.0 | LDC software: v2.4.0b3
5.4. Crosspoint Menu
The receiver is built with a 2x2 video crosspoint and a 2x3 audio crosspoint which can be controlled in this
menu. The section is about the available video and audio crosspoint settings. #crosspoint #switch
5.4.1. Video Layer
Crosspoint menu - Video layer
The two video input ports (
TPS in 1
and
HDMI in 2
) are in the horizontal tiles and the two video output ports
(
HDMI out 1
and
2
) are in the vertical tiles. The
light grey tiles
means the active crosspoint setting in the
crosspoint area.
See the details about the video input ports in the
Video - TPS In 1 and the Video - HDMI In 2 sections, about
the video output ports in the Video - HDMI Out 1 and 2 section.
5.4.2. Audio Layer
Crosspoint menu - Audio layer
The two audio input ports (
TPS in 1
and
HDMI in 2
) are in the horizontal tiles and the three audio output ports
(
HDMI out 1
,
HDMI out 2
and
Analog out
) are in the vertical tiles. The
light grey tiles
means the active crosspoint
setting in the crosspoint area.
See the details about the input audio ports in the
Audio - TPS In 1 and HDMI In 2 section, about the audio
output ports in the Audio - HDMI out 1 and 2 and the Audio - Analog Audio Out sections.
   