Lightware HDMI-TPS-RX220AK User Manual Download Page 89

Page: 89 / 118

7. LW3 Programmer's Reference

HDMI-TPS-RX220AK – User's Manual

Applied firmware package: v1.4.0 | LDC software: v2.4.0b3

7.10.3.

Set the Timeout

When the set time is elapsed after the last received message, the device saves the data. It can be applied,

when there is no special or easily defined delimiter string in the incoming serial data, but there is a time gap

between the messages.

SET·/MEDIA/UART/RECOGNIZER.TimeOut=

pw·/MEDIA/UART/RECOGNIZER.TimeOut=<

timeout>

Parameters

Timeout value in ms.;

: disable the timeout; minimum value: 10.

Example

SET /MEDIA/UART/RECOGNIZER.TimeOut=20

pw /MEDIA/UART/RECOGNIZER.TimeOut=20

7.10.4. Query the Last Recognized Serial Message in String Format

The recognized data is stored in string format. They are stored until the next incoming message or until the

RECOGNIZER:clear() method is called.

TIPS AND TRICKS:

When one of these properties are set as a condition in the Event Manager, and the

same strings follow each other, the action

will execute once

Command and Response

GET·/MEDIA/UART/RECOGNIZER.Rx

pr·/MEDIA/UART/RECOGNIZER.Rx=

<recognized_string>

Parameters

Max. 12 byte-long recognized data string.

Example

GET /MEDIA/UART/RECOGNIZER.Rx

pr /MEDIA/UART/RECOGNIZER.Rx=Login:

#recognizer #rs232recognizer #rs-232recognizer

7.10.5. Query the Last Recognized Serial Message in Hex Format

The recognized data is stored in hex format. They are stored until the next incoming message or until the

RECOGNIZER:clear() method is called.

TIPS AND TRICKS:

When one of these properties are set as a condition in the Event Manager, and the

same strings follow each other, the action

will execute once

Command and Response

GET·/MEDIA/UART/RECOGNIZER.RxHex

pr·/MEDIA/UART/RECOGNIZER.RxHex=

Parameters

Recognized data in hex format.

Example

GET /MEDIA/UART/RECOGNIZER.RxHex

pr /MEDIA/UART/RECOGNIZER.RxHex=FF1F4C6F67696E3A

7.10.6.

Clear the Stored Last Recognized Serial Message

This method deletes all the stored received serial messages.

Command and Response

CALL·/MEDIA/UART/RECOGNIZER:clear()

mO·/MEDIA/UART/RECOGNIZER:clear

Example

CALL /MEDIA/UART/RECOGNIZER:clear()

mO /MEDIA/UART/RECOGNIZER:clear



 



Summary of Contents for HDMI-TPS-RX220AK























































































































Search results

Summary of Contents for HDMI-TPS-RX220AK

Reviews:

Lightware HDMI-TPS-RX220AK, User Manual, Page: 89 / 118

Search results

Summary of Contents for HDMI-TPS-RX220AK

Reviews: