5. Software Control - Lightware Device Controller
HDMI-TPS-RX220AK – User's Manual
53
Applied firmware package: v1.4.0 | LDC software: v2.4.0b3
5.12.4.
Create and Restore Backups from the Device Memory
The receiver is able to store backups in its own memory and can be recalled from there so user does not
need to save backup files to the local computer. Four slots are available for this purpose.
You can save presets as unprotected using the
Save
button and as protected with using the Save as protected
button. To restore a preset, select on the slot of the desired backup and click on the
Apply
button. You can
save presets from a file from your local computer clicking on the
Upload
button and you can also save a
preset from the device's memory to a backup file with using the
Download
button. If you do not need a saved
preset any more, select it and click on the
Delete
button.
WARNING!
Loading factory default settings will erase all presets which has been saved in the device
memory!
5.13.
Advanced View Window
1
2
3
7
6
5
4
1
LW3 protocol help
Pushing the button results a help window opening which describes the most
important information about LW3 protocol commands in HTML format.
2
Edit mode
The default appearance is the read-only mode. If you want to modify the
values or parameters, tick the option. You will be prompted to confirm your
selection.
3
Warning mode
If this is checked, a warning window pops up when you enable Edit mode.
4
Node list
Correspondent parameters and nodes are shown which are connected to the
selected item in the protocol tree.
Manual
button: Manual (short description) of the node can be called and
displayed in the terminal window.
Set
button:
Saves the value/parameter typed in the textbox.
Call
button:
Calls the method, e.g. reloads factory default settings.
5
Protocol tree
LW3 protocol tree; select an item to see its content.
6
Command line
Type the desired command and execute it by the
Send
button. Clear all current
commands and responses in the Terminal window by the
Clear
button.
7
Terminal window
Commands and responses with time and date are listed in this window. Sent
command starts with ‘>’ character, received response starts with ‘<’ character.
The color of each item depends on the type of the command and response.
The content of the window can be emptied by the
Clear
button. If the
Autoscroll
option is ticked, the list is scrolled automatically when a new line is added.
#terminal #advancedview