manualshive.com logo in svg

Lightware HDMI-TPS-RX220AK, User Manual, Page: 20 / 118

Share
Download
Lightware HDMI-TPS-RX220AK User Manual Download Page 20

 

3. Installation 

HDMI-TPS-RX220AK – User's Manual 

20

Applied firmware package: v1.4.0 | LDC software: v2.4.0b3

Powering Options

A

Using local PSU

 - connect the 12V power adaptor to the DC input on the receiver first, then to the AC 

power socket.

B

Using PoE with connecting a transmitter

: connect the TPS IN (PoE) port of the receiver to the 

TPS+PoE output port of the TPS-PI-1P1 power injector by a CATx cable as well as connect the TPS 

output port of the transmitter to the TPS port of the TPS-PI-1P1 by a CATx cable.

C

Using PoE with connecting a matrix or an output board

: connect the TPS IN (PoE) port of the  receiver 

to the PoE-compatible TPS output port of the matrix or output board by a CATx cable.

ATTENTION! 

In case of connecting the receiver to an output board of the matrix always connect an 

external PSU to the board. For the detailed information please read the user's manual of the matrix.

ATTENTION! 

The Ethernet port does not support PoE. Only the TPS port support PoE function.

INFO: 

If both remote and local power sources are connected, the remote power will be used.

 

Summary of Contents for HDMI-TPS-RX220AK























































































































Reviews:

No comments