manualshive.com logo in svg

Lightware HDMI-3D-OPT-TX210A, User Manual, Page: 90 / 106

Share
Download
Lightware HDMI-3D-OPT-TX210A User Manual Download Page 90

9.  Firmware upgrade

The transmitter can be upgraded by using Lightware Device Updater (LDU) software via 

USB. The application and the User's manual can be downloaded from 

www.lightware.eu

. 

In order to get the firmware pack with the necessary components (*.lfp file) for your specific 

product, please contact 

[email protected].

ATTENTION!

 

 

While the 

firmware is being upgraded, the normal operation mode is suspended as the 

transmitter is switched to bootload mode. Signal processing is not performed. Do not 

interrupt the firmware upgrade. If any problem occurs, reboot the transmitter and restart 

the process.

ATTENTION!

 

 

The firmware upgrade process has an effect on the configuration and the settings of the 

device. For more details, please see the section 

9.5

 on page 

96

 before the upgrade.

9.1. 

About the firmware package (LFP file)

The  firmware  files  are  handled  in  a  different  way  and  the  new  approach  means  new 

features. If a device has to be upgraded, only one file is necessary (LFP file):

 

▪

The structure allows using the same LFP package for different devices (e.g. HDMI-
3D-OPT-TX200 series devices have only one common package).

 

▪ The package contains all the necessary components, binary, and other files; You do 

not have to get further files.

 

▪ There is a descriptor file in the package that contains each firmware with version 

number and a list showing the compatible devices. The descriptor is displayed after 

loaded the LFP file in the LDU.

9.2.  Short instructions

Step 1. 

Get the firmware pack and the Lightware Device Updater (LDU) application.

Step 2. 

Install the LDU application.

Step 3. 

Establish the connection between the computer and the device(s).

Step 4. 

Start the LDU and follow the instructions shown on the screen.

9.3.  Install and upgrade

Installation in case of Windows OS

INFO 

 

The application can be installed under Windows XP or above.

Run the installer. If the User Account Control drops a pop-up message click 

Yes

. During the 

installation you will be prompted to select the type of the installation:

Normal install

Snapshot install

Available for Windows and Mac OS X

Available for Windows

The installer can update only this instance

Cannot be updated

Only one updateable instance can exist for 

all users

More than one different version can be 

installed for all users

Comparison of install types

ATTENTION!

 

 

Using the Normal install as the default value is highly recommended.

Page 90 / 106 

Firmware upgrade

Summary of Contents for HDMI-3D-OPT-TX210A











































































































Reviews:

No comments