Lightware HDMI-3D-OPT-TX210A, User Manual, Page: 42 / 106

6.7.2. Create or modify an Event
Wizard mode
The wizard mode lists the most common conditions and actions, so the user does not have
to look for LW3 nodes and properties.
Step 1. Click on the Edit button of the desired Event; the
Event editor is displayed.
Step 2.
The wizard mode is displayed as default. Select
the desired
Category
first (e.g. Audio or Video).
Step 3.
Select the desired
Expression
from the drop-
down menu. If any other parameter is necessary
to set, it is going to be displayed.
Step 4.
Press the
Apply
button to store the settings of the
Condition.
Advanced mode
The goal of this mode is the same as of the wizard: set the properties and methods for
conditions and actions. The difference is the number of the available and usable properties
and methods of the LW3 protocol. Advanced mode allows almost all of it.
Step 1. Click on the Edit button of the
desired Event; the Event editor is
displayed.
Step 2.
The wizard mode is the default,
press the
Advanced
button.
The LW3 protocol tree is
displayed showing the list of
the properties in the drop-down
menu. Navigate to the desired
node.
Step 3.
Select the desired
Property
from
the menu. The
manual
of the
property is displayed below to help to select the necessary property and to set the
value.
Step 4.
Set the desired
value
and
operator
, then press the
Apply
button to store settings.
The Link tool
The new interface allows creating more actions to the same condition. In that case, a
condition can trigger more actions. To set such an Event, the Link tool has been introduced.
Step 1. Click on the Edit button of the
desired Event; the Event editor is
displayed.
Step 2.
The wizard mode is displayed as
default, press the
Link
button.
Step 3.
All the saved Events are analyzed
and the
conditions
are listed (it takes some seconds to finish). The
Show advanced
expressions
option allows showing the exact path and set the value of the given
property.
Step 4.
Select the desired
Condition
and press the
Apply
button to store the settings.
ATTENTION!
The structure of the Action panel is the same as the Condition; see the right panel.
Page 42 / 106 Software control