6.5.1. Changing emulated EDID
Step 1.
Choose the desired
EDID list
on the source panel and select an
EDID
.
Step 2.
Press the
Emulated
button on the top of the Destination panel.
Step 3.
Select the desired
port
on the right panel (one or more ports can be selected); the
EDID(s) will be highlighted with a yellow cursor.
Step 4.
Press the
Transfer
button to change the emulated EDID.
6.5.2. Learning an EDID
The process is the same as changing the emulated EDID; the only difference is the
Destination panel: press the
User
button. Thus, one or more EDIDs can be copied into the
user memory either from the factory memory or from a connected sink (Dynamic).
6.5.3. Exporting an EDID
ATTENTION!
This function is working on Windows and Mac OS X operating systems and under Firefox
or Chrome web browsers only.
Source EDID can be downloaded as a file (*.bin, *.dat or *.edid) to the computer.
Step 1.
Select the desired
EDID
from the Source panel (highlighted with a yellow cursor).
Step 2.
Press the
Export
button to open the dialog box and save the file to the computer.
6.5.4. Importing an EDID
Previously saved EDID (*.bin, *.dat or *.edid file) can be uploaded to the user memory:
Step 1.
Press the
User
button on the top of the Source panel and select a
memory
slot.
Step 2.
Press the
Upload
button below the Source panel.
Step 3.
Browse the file in the opening window then press the
Open
button. Browsed EDID is
imported into the selected User memory.
ATTENTION!
The imported EDID overwrites the selected memory place even if it is not empty.
6.5.5. Deleting EDID(s)
The EDID(s) from User memory can be deleted as follows:
Step 1.
Press
User
button on the top of the Destination panel.
Step 2.
Select the desired
memory
slot(s); one or more can be selected (“Select All” and
“Select None” buttons can be used). The EDID(s) will be highlighted with a yellow
cursor.
Step 3.
Press the
Clear selected
button to delete the EDID(s).
HDMI-3D-OPT-TX200 series
User’s manual
Software control
Page 37 / 106