5. Software Control - Lightware Device Controller
UMX-TPS-TX100 series – User's Manual
83
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
5.13.
The Built-In Miniweb
DEFINITION:
The miniweb is a dedicated location in the memory where an HTML file can be uploaded
to. If the
http://<IP_address>/index.html
page or the
http://<host_name>/index.html
is
opened in a web browser the file is displayed.
ATTENTION!
The Miniweb is available from FW package v1.1.5b1. The default control page can installed
in the device during the first firmware update process by the user if the necessary parameter is enabled.
See the
Step 3. Check the update parameters.
section.
The default control page allows the followings:
▪
Source selection:
This block can be used to select an input or enable/disable the Autoselect remotely
e.g. from a mobile device.
▪
Action triggers:
The action trigger buttons can be used to perform a configured Event Action without
waiting for the condition to occur. This can be done remotely by a mobile device, too.
The Control Page Displayed in a Desktop Browser (with Action Trigger Buttons)
#miniweb #builtinweb #web
5.13.1.
Opening the Miniweb
The Miniweb is available by:
▪
Opening a
web browser
and typing the
http://<IP_address>.index.html
or the
http://<IP_address>
in the
address line, or
▪
Launching the
LDC
, connecting to the device, navigating to
Settings/Status
and pressing the
Open
miniweb
button.
INFO:
The host name can be used instead of the IP address; see the
The Control Page Displayed in a Smartphone Browser