manualshive.com logo in svg

Lightware FP-UMX-TPS-TX120, User Manual, Page: 21 / 183

Share
Download
Lightware FP-UMX-TPS-TX120 User Manual Download Page 21

 

2. Product Overview 

UMX-TPS-TX100 series – User's Manual 

21

Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2

Firmware Version Indication

After being powered on, the transmitter lights up all LEDs, then displays its firmware version using three 

LEDs on the front panel: the upper three in the left column. The top LED means the first number of the 

firmware version – actually this is the main version. The second and the third LEDs from the top indicate the 

second and the third numbers of the firmware version which mean the subversions.

 

#firmwareversion

Example - WP-UMX-TPS-TX130-US

The process after the device is switched on or rebooted is the following:

Step 1. 

VGA LED blinks once the first number (1).

Step 2. 

DP LED blinks twice the second number (2).

Step 3. 

HDMI LED stays dark showing the third number (0).

VIDEO

AUDIO

DVI-A Video

Autoselect

HDCP

Audio2

DVI-D

DP

DVI-D

DP

INPUT STATUS

HDMI

HDMI

VGA

Audio1

1.3.2

1.4.0

VIDEO

Autoselect

HDMI

INPUT STATUS

DP

VGA

AUDIO

TPS LINK

HDMI

DP

AUDIO

UMX-TPS-TX140

WP-UMX-TPS-TX130-US

2.7. 

Rear Panel LEDs

LIVE LED

off

The device is not powered.

green

blinking (slow)

The device is powered and operational.

green

blinking (fast)

The device is in firmware update (bootload) mode.

green

on

The device is powered but not operational.

RS-232 LED

off

RS-232 ports (Local and Link) are in Passthrough mode.

green

blinking

Command injection mode is active.

green

on

RS-232 ports (Local and Link) are in Control mode.

SRVC LED *

green

on

Test pattern is the selected and active input source.

USB KVM LED *

off

No USB link between the transmitter and the controlled device 

(e.g. PC).

green

on

The USB is enumerated.

LINK LED

off

No TPS link between the transmitter and the receiver.

green

blinking (slow)

Low power mode is active.

green

blinking (fast)

Ethernet fallback mode is active.

green

on

TPS link is established, HDBaseT or Long Reach mode is active.

*

 Only the UMX-TPS-TX140K model has USB KVM LED, but it does not contain SRVC LED.

#status

 

Summary of Contents for FP-UMX-TPS-TX120
























































































































































































Reviews:

No comments