7. LW3 Programmers’ Reference
UMX-TPS-TX100 series – User's Manual
113
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
7.7.6.
Change the Autoselect Mode
Command and Response
#audio
ç
CALL·/MEDIA/AUDIO/XP:setDestinationPortAutoselect(
<out>
:
<out_set>
)
æ
mO·/MEDIA/AUDIO/XP.setDestinationPortAutoselect
Parameters
See at previous section.
Example 1
ç
CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(O1:EL)
æ
mO /MEDIA/AUDIO/XP:setDestinationPortAutoselect
The setting is changed to
EPM
: Autoselect is enabled (
E
); the mode is set to
Priority detect
(
P
), and the port will
be disconnected if a higher priority port becomes active (
M
).
Example 2
ç
CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(O1:D)
æ
mO /MEDIA/AUDIO/XP:setDestinationPortAutoselect
The setting is changed to
DPM
Autoselect is disabled (
D
). The other settings remain unchanged. Since the
outputs are linked, the change will affect local and link out.
INFO:
For more information about the Autoselect feature see
7.7.7. Query the Input Port Priority
Command and Response
ç
GET·/MEDIA/AUDIO/XP.PortPriorityList
æ
pr·/MEDIA/AUDIO/XP.PortPrioirtyList=
<out1_list>
;
<out2_list>
;
<…>
;
<out#_list>
The response shows the priority of each output one after another. The priority number can be from 0 to 31;
0 is the highest- and 30 is the lowest priority. 31 means that the port will be skipped from the priority list.
Parameters
<out1_list>
The input port priority order of the given output port: <in1>,<in2>,…,<in>
Example
ç
GET /MEDIA/AUDIO/XP.PortPriorityList
æ
pr /MEDIA/AUDIO/XP.PortPriorityList=0,1,2,3,4,5
Output
Video input port
I1
I2
I3
I4
I5
I6
Priority
0
1
2
3
4
5
Highest priority is assigned to I1 port.
ATTENTION!
The same priority number can be set to different input ports. When the priority numbers
match, the input port with the lowest port number will have the highest priority.
7.7.8.
Change the Input Port Priority
Command and Response
#audio
ç
CALL·/MEDIA/AUDIO/XP:setAutoselectionPriority
<(in>
\(
<out>
\):
<prio>
);(
<in>
\(
<out>
\):
<prio>
)
æ
mO·/MEDIA/AUDIO/XP:setAutoselectionPrioirty
Parameters
<prio>
Priority number from 0 to 31, equal numbers are allowed (31 means that the port will be
skipped from the priority list).
An input port priority can be set on an output port. Many settings can be executed by separating a semicolon
(no space), see the example below.
Example
ç
CALL /MEDIA/VIDEO/XP:setAutoselectionPriority(I1\(O1\):4;I2\(O1\):4)
æ
mO /MEDIA/VIDEO/XP:setAutoselectionPriority
The priority number of input 1 and Input 2 has been set to 4 on output 1. The example shows that certain
control characters have been escaped: the backslash “\” character is inserted before the “(“ and “)” characters.
See more information about the escaping in the
Escaping
section.