Lightware DVI-OPT-RX220-Pro Page 9 User Manual Download

Page: 9 / 39

3. Product Overview

DVI-OPT-220-Pro series – User's Manual

Product Overview

The following sections are about the physical structure of the device, input/

output ports, and connectors:

Transmitters

Receivers

Electrical Connections

Multimode Single Fiber Extender Concept

3.1.

Transmitters

3.1.1. Front View

INFO: The front view of DVI-OPT-TX220-Pro and DVI-OPT-TX220-ST-Pro is almost the same; the only

difference is the type designation.

Power LED

Power LED lights green when the unit is powered on.

Menu display

Displays status information and menu operation. See

Front Panel LCD Menu Operations

section for more information.

Status LEDs

For more details, see the legend for the

Status LEDs

below.

Menu

navigation

Up, down, left, right and enter buttons for menu navigation. See

Front Panel LCD Menu

Operations

section for more information.

Status LEDs

POWER

green

on The transmitter unit is powered and ready to use.
off The transmitter unit is NOT powered on.

LASER ACTIVE

green

on It gives feedback about the operation of the optical module (laser is enabled), that means

the laser radiates invisible waves. Avoid direct eye contact with the optical connectors!

off Laser module is not active (laser is disabled on the output port).

DVI INPUT SIGNAL PRESENT

green

on Indicates when a valid DVI signal is detected on the DVI INPUT connector.
off There is no valid DVI signal on the DVI INPUT connector.

SOURCE CONNECTED (pin14 +5V)

green

on Indicates if a DVI source is connected to the unit, it is powered on and sends +5V signal to pin

14 of the input DVI connector.

off The source does not send +5V signal to the pin 14 of the input DVI connector.

POWER

SOURCE CONNECTED (pin14 +5V)

LASER ACTIVE

DVI INPUT SIGNAL PRESENT

ENTER

DVI Multimode Fiber Transmitter

DVI-OPT-TX220-ST-Pro

DVI-OPT-TX220-PR
SN:06342203

Summary of Contents for DVI-OPT-RX220-Pro








































Search results

Summary of Contents for DVI-OPT-RX220-Pro

Reviews:

Related manuals for DVI-OPT-RX220-Pro

Brands by name

Popular brands

Lightware DVI-OPT-RX220-Pro, User Manual

Search results

Summary of Contents for DVI-OPT-RX220-Pro

Reviews:

Related manuals for DVI-OPT-RX220-Pro

Brands by name

Popular brands