Lightware DP-OPT-RX150 User Manual Download

Page: 7 / 39

1. Introduction

DP-OPT-TX150, DP-OPT-RX150 – User's Manual

Applied firmware package: v1.1.13 | LDC software: v2.5.1b5

USB 2.0 HUB

DP-OPT-TX150 connected to a computer via USB can be used as a local USB HUB with two

USB 2.0 ports.

THUNDERBOLT

Thunderbolt

Sources with Thunderbolt port are also supported – just connect a miniDP-DP cable between

the source and DP-OPT-TX150.

LED1
LED2
LED3

Front Panel LEDs

Immediate feedback about the status of connected DP source and monitor. Fiber link-, USB-

and HDCP-status are also shown on the front panel.

USB Control

USB management, information about connected devices and firmware upgrade can be

accessed with Lightware software via USB connection.

Universal Power Adaptor

Equipped with a uni5V DC power adaptor, which accepts AC voltages from 100 to 240

Volts with 50 or 60 Hz line frequency.

Kensington Security Slot

Support

The security slot can be found on the side of the units for theft protection.

1.6.

Typical Applications

Stand-alone Diagram with a High-resolution DP monitor

Stand-alone Diagram with an HDMI Projector

Daisy-chained Thunderbolt Devices and a LED Cinema Display



 



Summary of Contents for DP-OPT-RX150








































Search results

Summary of Contents for DP-OPT-RX150

Reviews:

Related manuals for DP-OPT-RX150

Brands by name

Popular brands

Lightware DP-OPT-RX150, User Manual

Search results

Summary of Contents for DP-OPT-RX150

Reviews:

Related manuals for DP-OPT-RX150

Brands by name

Popular brands