6. Programmer's Reference
DA2DVI-HDCP-Pro – User's Manual
20
6.2.4. Compile Time
Description: Shows the CPU firmware compile time.
Legend
:
Explanation: The firmware was made on 10.04.2012 at 16:36:35.
6.2.5. View Installed Board
Description
: Shows the hardware name and revision of the installed board.
Explanation
: The device reports that it has an installed motherboard, the hardware revision is 1.1.
6.2.6. View Board Information
Description: Shows the firmware version and installed board together.
Explanation: The device has an installed motherboard, the firmware version is 1.2.2r.
6.3. System Commands
6.3.1. Restart the Device
Description: The distribution aplifier can be restarted without unplugging power.
Explanation
: The device reboots without any response.
Format
Example
Command {CT}
→
{ct}
Response (Compiled:<DATE>
●
<TIME>)CrLf
←
(Compiled: May 10 2012 16:36:35)
Identifier
Parameter
<DATE>
Month, day and year
<TIME>
Hours, minutes and seconds
Format
Example
Command {IS}
→
{is}
Response (SL#
●
0
●
<MB_DESC>)CrLf
(SL
●
END)CrLf
←
←
(SL# 0 DA2DVI-HDCP-PRO SCH_1.1
PCB_1.1)
(SL END)
Format
Example
Command {FC}
→
{fc}
Response (CF
●
<DESC>)CrLf
(CF END)CrLf
←
←
(CF DA2DVI-HDCP-PRO FW:1.2.2r)
(CF END)
Format
Example
Command {RST}
→
{rst}
Response
←
6.4. EDID Router Commands
6.4.1. Save EDID to User Memory
Description
: Learn EDID from <loc2> to <loc1>.
Explanation
: EDID from output 3 is saved to user EDID #4.
Legend
:
<loc1> has to be ‘Uxx’.
<loc2> can be ‘Fxx’ or ‘Uxx’ or ‘Dxx’ or ‘Exx’.
6.4.2. View Emulated EDID on Input
Description
: Shows the currently emulated EDIDs for the input.
Explanation
: EDID from the output(s) is dynamically emulated on the input.
6.4.3. Watch EDID Validity Table
Description
: Shows EDID validity table, which contains information about the EDID memory states.
Explanation: There is one ‘1’ on the first position of the user EDID table. This means that the location 1 of the
user EDID memory is filled out, the remain ones are empty.
Format
Example
Command {<loc1>:<loc2>}
→
{u4:d3}
Response
(E_SW_OK)CrLf
(E_S_C) CrLf
←
←
(E_SW_OK)CrLf
(E_S_C) CrLf
Format
Example
Command {VEDID}
→
{vedid}
Response (VEDID
●
<IN>)CrLf
←
(VEDID D1)
Format
Example
Command
{WV<type>}
→
{wv*}
Response (EV<type>
●
<VALIDITY_TABLE> )CrLf
←
←
←
(EVU 100000000000000000000000000000000
00000000000)
(EVD 10)
(EVE 1)
