4
Getting started
Visual Poi V4 is very easy to operate. All functions of the device are controlled by pressing a single
button located at the end of the poi, in the handle:
Location of the main button on the Visual Poi
Visual Poi is turned ON/OFF by pressing the main button for 2 seconds.
It’s indicated by a quick
double blink of one LED on the device, which also serves as a battery level indicator. Green color
–
battery is full, orange color
–
battery is getting empty, red color
–
battery is empty and needs
recharge.
Visual Poi battery level indicator
If you leave Visual Poi unattended for
30 minutes
, it automatically turns off. Also, when the battery level drops too low, the Visual
Poi turns itself OFF to protect the battery and you need to charge the Visual Poi to use it again.
After turning on, the Visual Poi enters a
so called “
standby mode
”
. In this mode, 8 LEDs closest to the
main button will shine in either blue or pink color, indicating communication with the FT remote:
FT remote is answering, signal quality is good.
FT remote is turned off or signal quality is poor.
Press the main button once (or any button on the FT remote) to quit the standby mode.
Main button
