1
INSTRUCTIONS
NO.
LC005262
WHAT WE PROVIDE
•
2 Glass Bunnies
•
4 CR2032 Batteries (2 per Bunny)
IMPORTANT
Before using your LampLust Glass Bunnies, please make sure that you
carefully read through these instruction sheets.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense, caution and care
are factors that can’t be built into any product. This approach must be
used by the person(s) caring for and operating the glass bunnies.
GENERAL INFORMATION
Battery installation should only be performed by an adult. Only batteries of
the same or equivalent type as recommended should be used. Battery
leakage can cause corrosion and damage to this product so please remove
non-functioning batteries immediately. Remove batteries from the product
during long periods of non-use.
DO NOT DISPOSE OF IN FIRE. Please dispose at your local recycling facility.
STEP BY STEP INSTRUCTIONS
Before turning on your glass bunny lights, remove the battery tab from the battery
compartment, (located on the bottom of the bunny) thereby activating
the battery.
1
BATTERY INSTALLATION
Each bunny works with 2 x CR2032 MAX or CR2032
batteries (included). The battery compartment is located
on the bottom of the bunny. The battery box has a little
metal tab. Lift the tab slightly and insert the batteries
between the tab and the spring. Push the tab back
down to secure before replacing the plastic battery
cover. Batteries should be inserted with the correct
polarity as indicated (+/-) and battery compartments
secured before use.
