FireFly FF-151 Instructions
And Specifications
QUICK START
If you prefer to start using your new FF-151 straight out of the box, then read the
instructions later, it’s quite easy to be up and running in just minutes. Three easy
steps are all that are necessary for professional lightning simulation.
1)
Connect lights (up to 2,000 for lightning or 1,000 watts in the dimming
mode) to the power outlet on the rear of your FF-151.
2)
Connect an appropriate audio source (CD player, laptop, MP3 player, etc.) to
the AUDIO INPUT jack on the rear panel. Then connect an amplifier and/or
amplified speakers to the 1/8” stereo AUDIO OUTPUT jack on the rear of the
lightning simulator. Even though this is a single channel device, you should
ALWAYS USE STEREO CABLES.
3)
Connect AC power.
No other connections or adjustments are required for basic operation.
WHEN POWERING UP…
Upon power up, the FF-151 goes through a quick self-test and the Lights Alive logo
appears. After roughly three seconds, the system is fully functional. When you start
playing the audio thunder tracks, the lights will respond. If the lights are not
responding as expected, turn up the volume on your audio source or increase the
level in the FF-151 via the LCD screens.
CUSTOMIZED SETTINGS
Five pushbuttons allow you to fully customize your FF-151 settings. Pressing the
center MENU button gives you access to several additional windows. Pressing the
UP and DOWN buttons scrolls through the windows. The (+) and (–) buttons alter
the settings for that particular window. Pressing MENU again will exit the program
