Page 3 of 5
AS40D COMPACT DMX DIMMER
Version 2.1
OWNERS MANUAL
10/08/2021
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
tel 757 486 3588
Eight different chaser patterns are available. A
“bounce” condition may be imposed on several of
the chase patterns by setting one of the DIP
switches. The bounce condition causes the chase
pattern to run in alternating directions.
The chase step time may be controlled for up to 64
seconds per step. Step fade time is proportional to
the step time. If a channel is in the relay mode
during chaser operation - it will “snap” on and off
(zero fade time). The tables on the next page show
the details of chaser settings.
CHASER MODE SWITCH FUNCTIONS
MAINTENANCE AND REPAIR
TROUBLESHOOTING
•
Check that you have power applied to the
dimmer.
•
Check that all light fixtures are functional.
•
Check the fuses.
•
Check the DMX control cable
•
Check the settings of the dimmer DIP switches.
•
Check the console setup for correct patching.
REPAIR
The only AS40D user serviceable parts are
externally accessible fuses. Replace fuses ONLY
with 5 Amp, 250VAC, fast blow fuses. Internal
service on the unit by other than Lightronics
authorized agents will void the warranty. If service is
required, contact the dealer from whom you
purchased the dimmer, or Lightronics, Service
Department, 509 Central Drive, Virginia Beach, VA
23454. Tel: 757 486 3588.
SWITCHES
PATTERN
4 channel sequence
4 channel build
4 channel build/unbuild
4 channel random
3 channel se
3 channel build
3 channel build/unbuild
2 channel alternating
SWITCHES
STEP TIME
(Duration)
0.5 seconds
1.0 seconds
2 seconds
4 seconds
8 seconds
16 seconds
32 seconds
64 seconds
UP FOR BOUNCE
NORMAL/CHASER
(UP FOR CHASER)
3/4 DIM/RELAY
1/2 DIM/RELAY
UP = RELAY
DOWN = DIM
