LightPointe AireLink 60, Installation And User Manual

Page: 83 / 133

AireLink

60 Installation and User Manual Rev. D LinkManager™– Network Management
Platform
Page 83
Next the LinkManager™ main screen will appear. On the upper right of the window the local time,
system uptime and the IP address are displayed. Below the time and IP settings, there are “
Save
Settings ” and a “ Log out ” buttons.
On the left side of the main window several sub menus are displayed. Specific changes to some of the
system settings can be made within each of the sub menus. Settings that can be changed will be listed
in
red in the tables below. To change a system setting, first press the Edit button. Next the background
color of the specific entries that can be changed will turn white. After performing the desired changes
please press the “
Apply” button, or the “ Cancel ” button to keep the original settings. To make the
changes permanent do not forget to safe them to the system flash memory by clicking the “ Save
settings ” button on the upper right of the main page.
Clicking on a specific submenu will open a window displaying its content. In the following the
functionality provided by each submenu will be explained in detail.
Figure 6-3: LinkManager™ Main Screen
SYSTEM Shows general system information
RF LINK Allows monitoring and changing RF radio parameters
PORT STATUS Allows monitoring and changing physical network port specific settings
MANAGEMENT Allows monitoring and changing management port specific settings
STATISTICS Allows monitoring RMON counters
PERFORMANCE Allows for recording and storing RSSI and MCS values
SNMP Allows settings SNMP specific parameters
SOFTWARE Allows download/upload of software/firmware
ADMINISTRATION Allows settings/execution of administrative parameters
Upper right:
- System Time
- System Uptime
- System IP address
- System Installation Location
- Save Settings Log out