LightPointe AireLink 60, Installation And User Manual

Page: 43 / 133

AireLink

60 Installation and User Manual Rev. D Networking, Power and Service Connections
Page 43
User Panel Connections
AUX Power /-48Vdc power connection (Polarity independent)
RS485
Control Port
NA
PoE and
Management
Port
100/1000 Base-TX RJ-45 Ethernet Management connection for Out-of-Band
radio management and 802.3at compliant 48 Vdc PoE power connection
Data Port
100/1000 Base-TX RJ-45 copper/ SFP transceiver Combo port. SFP port
support all industry standard GbE fiber and copper SFPs.
Console USB based serial port connection (Customer Support / Technicians only)
Reset
When pressed for more than 5 seconds the system will revert to factory default
settings.
User Panel Status Indicators
RF ON Indicates if the RF modules is operational
RF SYNCH Indicates if local and remote radio units are synchronized
ALIGN
Indicates if system is in alignment mode.
Alignment mode is activated automatically when the system is
shipped and aligned initially. In alignment mode no network
connection is required to align the system.
POWER Indicates if system is powered on.
Table 3-1: User Panel Connections and Status LEDs