Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0605
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Spectral Architectural Lighting
SL203A
Page 1 of 1
Fluted Disk Fluted Forms 1-22W/40W T5 Circular
Features
1. Form:
Round form fabricated from slitted corrugated anodized aluminum.
Slits hold the sand blasted glass and reflector element. The illuminated edge
of the glass is visible through the corrugations.
2. Glass:
Center sand blasted glass with clear outer ring. Image of lamps seen
through the glass to create a geometric pattern on the wall or ceiling.
3. Housing:
Spun painted steel construction. Mounting plate houses the bal-
last and lamp sockets.
Mounting
Mounting:
Surface mounting to wall or ceiling surfaces.
Lamp Change:
Fluted housing simply twists-off. Held in place by 3 locking pins.
Luminaire Weight:
10.5 lbs.
Electrical
Ballast:
Electronic Program Rapid Start T5 circular lamps ballast. Universal
voltage “U” ballast automatically detect 120 volts or 277 volts operation. Ballast
use cathode heater shut-off to increase T5 round lamp life.
Lampholder:
2GX13 base, 4 Pin.
Options and Accessories
Double Switching:
Consult your Lightolier representative for more information.
Perforated Form
: Consult your Lightolier representative for more information.
Dimming Ballast
: Consult your Lightolier representative for more information.
Finish
Anodized corrugated aluminum sheet with precise flutes.
All painted parts are with powder coat paint process.
Labels
UL “c/us” Listed. Suitable for damp locations.
Ordering Guide (complete unit only)
Cat. No.
Lamp (circular)
Volt
Finish
SL203APZU
1-22W / 1-40W CT5
120/277V
Anodized Aluminum & Sand Blasted Glass
18 1/4"
(464mm)
3 1/2"
(89 mm)
