Page 1: ...BEFORE I AMPING AND RELAMPING Do not install fixture on a branch circuit having a Ground Fault Circuit Interrupter GFCI Typically electronic ballasts may cause GFCI tripping WARNING RWK OF FIRE DO NOT INSTALL INSULATION WITHIN 3 INCHES OF FMTUF ESIDES OR WIRING COMPARTMENT NOR ABOVE FIXTURE IN SUCH A MANNER TO ENTRAP HEAT EXISTING CONSTRUCTION p n FIG A FIG B FIG C FIG D FIG E FIG F L CUT OPENING ...
Page 2: ... snugly seated CLIP REMOVAL Fig J 3 Insert a small blade short handled screwdriver through the CLIPSS screwdriver slot and press against the opposite side of the CLIF 2 Push CLIP up to top of T SLUT and remove V SNAFON Fig E 1 SEE SEPARATE REFLECIUR TRIM INSTRUCTION VI PUSH UP Fig F SHEETS r JUNCTION BOX I CEIL 1 2 MAX 7 I f REFLECTOR TRIM I N P u T FIG K WIRHIJGDIAGRAM FOR 2 PIN BASE LAMP r BLACK...
