Ceiling Cutout: 11 1/16" L x 6 3/16" W
Ordering Information: MR 16 Series A
Cat. No.
Lamp
Ceiling Trim
Aperture Finish
PA2M167EBL
(2) 75W MR 16*
Overlap
Black with White Flange
PA2M167EWL
(2) 75W MR 16*
Overlap
White with White Flange
PA2M167EBTL
(2) 75W MR 16*
Trimless
Black
PA2M167EWTL
(2) 75W MR 16*
Trimless
White
Add a “1” for 120v or “2” for 277v at the *50W max. lamping when using accessories
end of the catalog number for voltage
PA2M167EBL
= (Flanged) Black/White
PA2M167EWL
= (Flanged) White
PA2M167EBTL
= (Trimless) Black
PA2M167EWTL
= (Trimless) White
14
8
10
20 1/8"
14"
9"
Flanged
Trimless
17 3/8" L X 10" W
5" OC
6
5
9
11
4
12, 13
3
2
1
10" L X 5" W Opening
1 3/4"
8 3/4
Depth
17"
7
Top View
Calculite
®
ProSpec
®
Linear Downlight
PA2M1675
Page 1 of 2
2 Light MR 16 Series A
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • D0711
Features
1. Aperture Frame:
Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge:
Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die cast aluminum.
3. Cross Blade Louver:
Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring:
Allows 360° horizontal and 35° (on width) and
45° (on length) vertical adjustment.
5. Tortiontite Spring:
For easy installation of aperture frame.
6. Housing:
Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets:
Adjustable vertically from outside of housing.
8. Thermal Protector:
Meets NEC and UL & CSA requirements.
9. Lampholder:
Steatite for GX/GY 5.3 Bi-Pin lamps. 250° C Teflon
®
leads.
10. Junction Box:
14 ga. steel, 4 x 3 1/2 x 2" box. Allows inspection
from below.
11. Lamp and Accessory Support:
.032" steel, flared for easy entry of
Media Cartridge.
12. Lens Retaining Ring:
.093" spring steel rod. Holds accessories in place.
13. Lamp Guard:
Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing:
Die formed 18 ga. steel.
Electrical
Electric Transformers:
Offer reliable operation and are accessible from below
for servicing. 12V. Secondary 75 VA. each lamp.
Electronic Controls:
Use only dimmers specifically designed for use with
magnetic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories:
2 1/2" dia. series, filters, lenses, screens, and louvers, (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon
®
is a registered trademark of E. I. DuPont.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
