Top View
13 1/8"
1 3/4"
8"
13"
Depth
8 3/4"
5" L X 5" W Opening
10 3/8" L X 10" W
17"
5
6
7
8
9
10
11
12, 13
14
1
2
3
4
Flanged
Trimless
5"
Ceiling Cutout: 6 3/16" L x 6 3/16" W
Ordering Information: AR 70 Series A
Cat. No.
Lamp
Ceiling Trim
Aperture Finish
PA1A705EBL
(1) 50W AR 70
Overlap
Black with White Flange
PA1A705EWL
(1) 50W AR 70
Overlap
White with White Flange
PA1A7053EBTL
(1) 50W AR 70
Trimless
Black
PA1A705EWTL
(1) 50W AR 70
Trimless
White
PA1A705EBL
= (Flanged) Black/White
PA1A705EWL
= (Flanged) White
PA1A705EBTL
= (Trimless) Black
PA1A705EWTL
= (Trimless) White
Calculite
®
ProSpec
®
Linear Downlight
PA1A7050
Page 1 of 2
1 Light AR 70 Series A
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711
Features
1. Aperture Frame:
Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge:
Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver:
Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring:
Allows 360° horizontal and 35° (on width) and 45° (on
diagonal) vertical adjustment.
5. Tortiontite Spring:
For easy installation of aperture frame.
6. Housing:
Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets:
Adjustable vertically from outside of housing.
8. Thermal Protector:
Meets NEC, UL , and CSA requirements.
9. Lampholder:
double contact bayonet base with 250°C #18 gauge Teflon
®
leads.
10. Junction Box:
14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
below.
11. Lamp and Accessory Support:
.032" steel, flared for easy entry of Media
Cartridge.
12. Lens Retaining Ring:
.093" spring steel rod. Holds accessories in place.
13. Lamp Guard:
Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing:
Die formed 18 ga. steel.
Electrical
Electronic Transformers:
Offer reliable operation and are accessible
frombelow for servicing. 12V Secondary.
Dimming Controls:
Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories:
2 1/2" dia. series, filters, lenses, screens and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon
®
is a registered trademark of E.I. DuPont.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
