11
7
9
1
8
2
3
10
4
5
6
31 3/8" L X 10" W
4 7/8" OC
4 7/8" OC
4 7/8" OC
20" L X 5" W Opening
8 3/4"
Depth
1 3/4"
45
°
Beveled Flange
14 3/4"
9 3/4"
18 3/4"
33 3/4"
Top View
Calculite
®
ProSpec
®
Linear Downlight
PE4M1675
Page 1 of 2
4 Light MR 16 Series E
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Features
1. Mounting Frame:
Provides clean support for Elbow and overlapping flange
installation. Extruded aluminum and aluminum plate, rigidly welded together
on all corners. Matte white finish.
2. Elbow:
Seamless; diecast aluminum. Allows 358° horizontal and
70° vertical adjustment.
3. Stepped Baffle:
Diecast aluminum. Matte black finish for low brightness.
4. Tortiontite Spring:
For easy installation of mounting frame.
5. Housing:
Die formed 22 ga. steel. Finish: Black.
6. Mounting Brackets:
Adjustable vertically from outside of housing.
7. Thermal Protector:
Meets NEC / UL & CEC / CSA requirements.
8. Lampholder:
Steatite for GX/GY 5.3 Bi-Pin MR-16 lamps. 250° C Teflon
®
leads.
9. Junction Box:
14 ga. steel, 4" x 3-1/2" x 3" box. Allows inspection
from below.
10. Lamp Guard:
Heat resistant clear glass. May be replaced with solid glass
accessory. Lamp manufacturers requirement.
11. Transformer Housing:
Die formed steel.
Electrical
Electronic Transformers:
Offer reliable operation and are accessible from
below for servicing. 12V. Secondary 75 VA. each lamp.
Dimming Controls:
Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(4) no. 12 AWG, 90°C.
Ceiling Cutout: 12 1/16”L x 6 3/16”W
Ordering Information: MR 16 Series E
Cat. No.
Lamp
Ceiling Trim
Aperture Finish
PE4M167EBL
(4) 75W MR 16*
Overlap
White with Black aperture
PE4M167EWL
(4) 75W MR 16*
Overlap
Black with Black aperture
Add a “1” for 120v or “2” for 277v at the *50W Max. when used with accessories.
end of the catalog number for voltage
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories:
Lamp guard may be replaced with 2”dia. series filters and lenses
only. The use of accessories redu0ces the lamp wattage rating to 50W.maximum.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon
®
is a registered trademark of E.I. DuPont.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
