Calculite
®
HID Lensed Wall Wash
C6P38MHL
Page 1 of 2
6" Aperture, PAR38/PAR30 Ceramic Metal Halide, Lensed
Features
1. Reflector Trim:
Low brightness,anodized aluminum; integral flange in
painted white or polished to match inside of cone.
2. Directional Spread Lens:
High temperature, tempered glass. Precisely fits
onto cone; replaceable.
3. Kick Reflector:
0.040” (16 ga.) aluminum. Clear anodized “Kick” reflector with
directional spread lens distributes light smooth for vertical surface wall washing.
4. Socket:
Medium base porcelain socket with nickel plated screwshell,
pulse-rated
5. Frame Housing:
Steel, 0.029" (22-Ga.), matte black finish.
6. Frame Vertical Adjustment Mechanism:
Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars:
Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs:
Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly:
Accessible from below and removable without
tools for inspection and ballast replacement .
10. Junction Box:
0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector:
(Not Shown) Meets NEC and UL requirements. Do Not
install insulation above nor within 3” (76mm) of any part of the luminaire.
Electrical
Electronic Ballast:
120V or 277V, 50/60 Hz. Electronic, encased, high power
factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies with
FCC part 18 non-consumer limits, shut-down circuit at end of lamp life, sound
rating "A", -5° F minimum starting temperature, Type 1 Outdoor rating.
Electrical (Cont.)
Ballast
ANSI Code Voltage
Max Amps
Input Watts
70W MH
M98/M143
120/277
0.67/0.28
78
100W MH M90/M140
120/277
0.90/0.43
110
Magnetic Ballast:
120V/277V Dual Voltage, 60HZ Encased and potted, H8-HPF
Circuit type, high power factor, sound rating “B”, -20° F minimum starting
temperature, type 1 outdoor rating.
Ballast
ANSI Code Voltage
Max Amps
Input Watts
70W MH
M98/M143
120/277
1.90/0.80
94
100W MH M90/M140
120/277
2.40/1.10
125
Options and Accessories
Fuse
(magnetic ballast)
:
Add suffix
F1
or
F2
to FIK (F1=120V F2=277V)
Chicago Plenum:
Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA (magnetic ballast only), I.B.E.W.
Reflector Trim
Frame-In Kit
Lamp (Ceramic MH)
C6P38MHL CLW
Specular Clear White Painted Flange.
CLP
Specular Clear Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C6A70P38E1
Electronic 120V
70W
PAR38 Wide Flood
C6A70P38E2
Electronic 277V
70W
PAR38 Wide Flood
C6A10P38E1
Electronic 120V
100W
PAR38 Wide Flood
C6A10P38E2
Electronic 277V
100W
PAR38 Wide Flood
Magnetic 120V/277V
70W
PAR38 Wide Flood
Magnetic 120V/277V
100W
PAR38 Wide Flood
9
10
5
8
1
2
4
3
6
7
1 1/8" (29 mm) max.
Ceiling Thickness
5-3/4" (146 mm) Dia.
7-7/8" (181 mm) Dia.
10 7/8"
(276 mm)
Vertical Adjustment:
3/4" (25 mm) to
2 7/8" (73 mm)
5/8" (16 mm)
C
15
"
(3
81
m
m
)
10-5/8"
(270 mm)
20" (508 mm) to
30" (762 mm)
Top View
(Electronic Ballast)
20" (508 mm) to
30" (762 mm)
10-5/8"
(270 mm)
15
"
(3
81
m
m
)
Top View
(Magnetic Ballast)
22-1/8" (562 mm)
19
-5
/8
"
(4
98
m
m
)
19
-1
/8
"
(4
86
m
m
)
20-1/4" (514 mm)
Ceiling Cutout:
6 9/16" (167mm) Dia.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406
