manualshive.com logo in svg

Lightning SA MultiCom, User Manual, Page: 22 / 172

Share
Download
Lightning SA MultiCom User Manual Download Page 22

Chapter 1    Preface

22 MultiCom Firewall

 

User’s Manual    

redundant fail-safe backup in case of failure on the Master firewall. This High 
Availability does not require dynamic routing or router discovery protocols to be 
installed on local networking devices.  

All VRRP configurations require the use of the Configurator software (included 
on the MultiCom Companion CDROM)  in the Advanced Configuration mode.  
Refer to the Lightning-Linux Reference Manual for information on configuring 
this feature.  

For more information or to purchasing this option contact your distributor.

Network Monitoring Option

All existing MultiCom Firewalls support Network Monitoring when the Network 
Monitoring Service (NMS) option is purchased.  NMS allows the MultiCom 
Firewall to maintain a list of TCP ports on local and remote networks and regular 
intervals check if the connection is available and measure the delay time.  The 
results of these status checks are written to the internal log, optionally can be 
emailed to selected email accounts, and is visible from the web interface and the 
Monitor software.

All NMS configurations require the use of the Configurator software (included on 
the MultiCom Companion CDROM)  in the Advanced Configuration mode.  
Refer to the Lightning-Linux Reference Manual for information on configuring 
this feature.  

For more information or to purchasing this option contact your distributor.

About This Manual

Putting together a solution to meet your networking needs is not always an easy 
task. Whether you are a seasoned professional or a new home-user you will find 
there are many possibilities you may have not have considered. This manual is 
designed to get your firewall up and started as soon as possible.  To better 
understand the more advanced features of your firewall please refer to the 
Lightning-Linux Reference Manual.

While every attempt has been made to explain the features and configuration 
steps of your new firewall you should have some basic experience in the 
following areas.

•

familiarity with general computer usage

Summary of Contents for MultiCom













































































































































































Reviews:

No comments