LIGHTLas SLT Deux-V
QUICK START GUIDE
SLT/YAG COMBINATION SYSTEM
with Vitreolysis
Page 1: ...LIGHTLas SLT Deux V QUICK START GUIDE SLT YAG COMBINATION SYSTEM with Vitreolysis ...
Page 2: ...table on first with the on switch Step 2 Adjust Table Height Make sure the green light is ON Adjust the height using the UP and DOWN arrows Step 3 Unlock the Emergency Switch Turn switch counter clockwise until it pops out Nothing will turn on until switch is unlocked Step 4 Turn on Slit Lamp Turn the key to turn on the Slit Lamp ...
Page 3: ...dden boost of illumination during treatment Step 7 Illumination Intensity Turn knob to graudally adjust the intensity of illumination Step 8 Adjust Arm Rest Height Turn black knob to loosen hold on arm rest Adjust height for comfort and tighten Move arm rest to opposite side using the hole in table or remove arm rest entirely ...
Page 4: ...ting Turn to adjust for YAG energy setting 12b SLT Energy Setting Turn to adjust for SLT energy setting Energy Reading View your adjusted parameters here Test Button Fires the laser while keeping the shutter closed Safest way to check laser output energy Set Button Changes the laser from Standby to Treat mode Push once desired parameters are set Set Pulse Change pulses from 1 2 or 3 pulses per las...
