Lighthouse ActiveCount100, Operator'S Manual

Page: 37 / 41

Lighthouse ActiveCount100 Operating Manual
248083444-1 Rev 2 P a g e 37 of 40
“J Smith”
“P Brown”
“Alice Chow”
“Ray Lopez”
. . .
Sampling Run Databases
Sampling Metadata in CSV Files: ActiveCount100 stores sampling metadata in the following files:
/Active Count 100_< serial-number >/acsamples_< date >.csv
Where <
date > is today’s date, e.g., YYYY-MM-DD. ActiveCount100 appends one line of sampling
metadata for each sampling run.
Export sampling metadata to third-party software, such as Laboratory Information Management (LIM)
systems, to complement data from other monitoring systems.
Each sampling database file contains the following comma-delimited fields for each sampling run.
CSV Field Description Sample Value
1 Timestamp
Date format – set in Settings menu

US (MM/DD/YYYY)

EU (DD/MM/YYYY)

ISO (YYYY-MM-DD)
Time (local 24-hour time)

HH: MM
7/16/2015 9:48
2 Location Current location LOC004
3 User Current user Ray Lopez
4 Sample Duration Total duration of sampling run in minutes 0:10:00
5 Flow Duration Actual sampling time in minutes 0:10:00
6 Volume Liters of air sampled 1000
7 Cycles Constant sampling = 1
Periodic sampling = number of user-specified cycles 1
8 Status No errors detected = Success
At least one error detected = Error Success
9 Flow Flow good = OK
Flow error = Error OK
10 Service Needed No service needed = OK
Service needed = Error OK
11 Calibration Calibration not yet due = OK
Calibration due = Error Error
12 Sample Aborted User did not abort sampling run = OK Error