Lighthouse a125, Installation And Operation Instructions Manual

Page: 451 / 460

PIN Signal
4
DDC CLK
5
DDC DATA
6 BLUE RTN
7 BLUE
8 Not used
9 H–SYNC 0V
10 GREEN RTN
11 GREEN
12 VIDEO IN2
13
VIDEO IN2 RTN
14 RED RTN
15 RED
Appendix E Switch panel application
Vessel control and monitoring systems
When integrated with a vessel control and monitoring
system your multifunction display can provide
monitoring and controls for your power circuits,
breakers, switches and equipment.
The Switch Panel application can be used to:
• Show the status of power circuits, breakers,
switches and other equipment.
• Apply power to each circuit individually.
• Reset tripped breakers.
• Control power to individual equipment.
• Alert users to a tripped circuit.
Vessel control and monitoring system
connection
The multifunction display can connect to and control
an EmpirBus NXT vessel control and monitoring
system.
D12738-1
1 2 V dc
1
2
4
3
5
1
Raymarine multifunction
display.
2
EmpirBus NXT DCM (dc
module).
3
SeaTalk ng to DeviceNet
adaptor cable.
4 EmpirBus NXT MCU (Master
control unit).
5
12 V dc supply into backbone.
Note: Ensure your vessel control and monitoring
system has been installed in accordance with the
instructions provided with the system.
Switch panel application
451