Lighthouse a125 Installation And Operation Instructions Manual Download Page 377

Page: 377 / 460

25.3 Browsing music

You can browse the music available on your
connected iPod or USB device.

From the Fusion link application:
1. Select the

Menu

icon.

2. Select

Browse Music

The media device name is displayed.

3. Select the media device.

The contents of the device are displayed.

4. Browse the available folders by selecting on

them.

5. Select the

Back

icon to move back up the folder

structure.

6. Select the track that you want to listen to.

The main screen is displayed and the track will
begin to play.

25.4 Selecting shuffle and repeat
functions

You can set the Fusion link application to repeat the
selected folder or to shuffle the play order.

From the Fusion link application:
1. Select the

Menu

icon.

2. Select

Repeat

to switch the repeat folder function

on or off.

3. Select

Shuffle

to switch the shuffle function on

or off.

Fusion link application

377

Summary of Contents for a125













































































































































































































































































































































































































































































Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands

Lighthouse a125, Installation And Operation Instructions Manual

Search results

Summary of Contents for a125

Reviews:

Brands by name

Popular brands