Lighthouse a125, Installation And Operation Instructions Manual

Page: 261 / 460

18.16 My Data options
The My Data menu provides access to your user
data.
The options are found in the My Data menu: Menu
> My Data .
• Waypoints — View the waypoints group list.
• Routes — View the Routes list.
• Tracks — View the Tracks list.
Refer to Chapter 17 Waypoints, Routes and Tracks
for further details.
18.17 Multiple chart synchronization
You can synchronize the heading, range, and
position information across multiple chart views and
networked displays.
When chart synchronization is enabled:
• It is indicated by “CHRT Sync” in the chart
application title bar.
• Any changes made to the heading, range or
position in any chart instance will be reflected in
all other chart instances.
Note: When the 2D and 3D chart views are
synchronized, the Motion Mode is always Relative
Motion.
Synchronizing multiple chart instances
From the chart application:
1. Select
Menu .
2. Select Presentation .
3. Select Chart Sync .
4. Select Chart from the list.
A tick is placed next to the selected option.
5. Repeat the steps above for each chart instance
and if required on each networked multifunction
display you want to sync the chart view.
Note: You cannot sync to another chart if radar
sync is turned on.
Chart application
261