CAUTION:
ALL THE INSTALLATION MUST BE COMPLETED BY A QUALIFIED ELECTRICIAN !
NOTICE:
When installing or using this suspended fixture basic safety precautions should be followed .Before installation
of any luminary onto an electrical junction box, be sure to disconnect power.Check that luminary voltage and
building voltage are the same.
Installation Instructions
LPL2-SS Suspended
suspension kit
fixture
cord
1
Turn off power at fuse box before proceeding
3
Install ceiling fitting
ceiling fitting
suspension kit
wood screws
anchor screw
5
canopy
finial
canopy bracket
cord
anchor screw
ceiling
hole
wood screw
set screw
Install canopy bracket
6
Find the right wiring based on below:
RED - LIVE
BLUE - NEUTRAL
GREEN - EARTH
WHITE - DIM LIVE
BLACK - DIM NEUTRAL
CLEAR - SPARE
a. 1 circuits with dim -- 6 core
BROWN - LIVE
BLUE - NEUTRAL
GREEN - EARTH
b. 3 core grey, black or white
WHITE - LIVE
BLACK- NEUTRAL
GREEN - EARTH
c. 3 core clear
7
Turn on power
For installation of single fixtrue
NO:85-0188-00(Page 1 of 2)
4
Connect suspension kit to fixture
fixture
1.press down
2.plug
after
3. loosen
fixture
2
Use the suction cup to remove the lens, then insert the
LED board and plug in the
connector, see page 2 for
details.
