![background image](http://html1.mh-extra.com/html/light-my-bricks/ecto-1-and-2-led-lighting-kit/ecto-1-and-2-led-lighting-kit_manual_1911671001.webp)
Light My Bricks : Ecto-1 & 2 LED Lighting Kit
Here is the instructions document for the Lego Ecto-1 & 2 LED lighting kit. Please read
and follow the steps carefully to ensure this lighting kit is installed properly.
Package contents:
5x
White 30cm Bit Lights
2x
White 15cm Bit Lights
4x
Flashing 15cm Bit Lights
1x
12-port Expansion Board
1x
Flat Battery Pack
(2x CR2032 batteries included)
Important things to note:
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they
are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together
around cables; instead ensure they are laying comfortably in between each stud.
Summary of Contents for Ecto-1 & 2 LED Lighting Kit
