Liftup North America, Inc. | 14928 Casey Rd | Tampa, FL 33264 | T: +1 844 543 8878 | M: [email protected] | www.liftup.us
21
USER MANUAL
–
RAIZER® II
–
US VERSION 03.02
1.
Press the UP arrow (
↑
) to drive the lifting
chair upwards.
The Raizer will only run for as long as the
button is activated.
NOTE:
The Raizer must be turned on for the
remote control to work (by a light push of
the on/off button on the side of the chair).
2.
The stop button is activated when it is
required to stop any movement of the
Raizer. Pull the button or the cord to
release the button from its position.
The Raizer can only be reactivated when
the stop button has been remounted.
9.
Operation
9.1
Assembling the Raizer
On our website we offer some helpful videos which will provide you with information
on alarms/signals and troubleshooting, assembly and disassembly of the Raizer:
https://www.liftup.dk/en/products/accessories/raizer-video-guide/
IMPORTANT!
Please observe that the backrest should be attached at first. If the legs are attached at
first, it will disturb the fitting of the backrest. Fit one side at a time.
Correct assembly
(first mount the backrest)
Incorrect assembly
(do NOT mount the legs at first)
