INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S
Hagensvej 21| DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
61
10
Enclosures
10.1
Liftup Control Software
In the FlexStep V2 Programming Software the virtual Top Stop can be adjusted. The screen
shows the settings for the two actuators connected to one control board. Adjust the
actuators in pairs, i.e. two Masters or Two Slaves. All values must be identical for all
actuators.