12
(24)
LIFTINGITALIA S.r.l.
Via Cadu� del Lavoro, 16 - 43058 Bogolese, Sorbolo (PR) - Italy
Phone +39 0521.695311 - Fax +39 0521.695313
www.li� ingitalia.com - info@li� ingitalia.com
6.1. MAGNETI DI FERMATA E RALLENTAMENTO
6.
DISPOSIZIONE MAGNETI
IM.TEC.077.IT_rev.2
- May 2019
EN
1.
With the system under maintenance, bring the car to the exact floor level (floor and car levels aligned);
2.
IS ascent sensor: gradually move from the top the 150 mm magnet towards the sensor, stopping just as the corresponding I13 LED on the card turns on;
3.
ID descent sensor: gradually move from the bottom the 150 mm magnet to the sensor, stopping just as the corresponding I11 LED on the card turns on.
MAGNETS LAYOUT
STOP AND SLOW-DOWN MAGNETS
INFORMATION
Two assemblers are needed:
: one in the machine room in front of the control panel and the other near the
sensors.
