LifeSpan Kids Joey Sandpit with Canopy, Owner'S Manual

Page: 4 / 14

4
1.4 ASSEMBLY ADVICE
•
The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt,
ask a technically qualified person.
•
Before you start with the assembly, read the instructions carefully.
•
Remove all packaging materials and lay down all parts on an open space. This gives you an
overview and simplifies the assembly procedure.
•
Check with the parts list that all parts are available. Dispose of the packaging material when the
assembly is completed.
•
Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble
the product with care.
•
Create a danger free environment; for example, do not let tools lay around the workspace. Store the
packaging material in a way that cannot cause any danger.
•
After installing the product according to the instruction manual, en sure all screws, bolts and nuts
are correctly installed and tightened and that all joints are secure.
•
Reasonable space must be kept between the product and possible sources of danger, such as
other equipment swimming pools and fences.
•
The product must be assembled correctly before use.
•
Place the product on a level surface at least 2 m from any structure or obstruction such as a fence,
garage or house.
•
Modifications made to the original product shall be carried out according to the instructions of the
manufacturer.
•
The product must always be used in a well-lit area.
•
Do not place anything under the product.
•
Use gloves during assembly and disassembly.
•
Outdoor products should be equipped with a device that in strong wind conditions avoid
displacement due to wind (e.g. steel bars in the ground or loads like sand bag or water bags).
•
In certain areas during winter, snow buildup and the low temperatures can damage the product. It is
recommended to remove snow buildup and to store the product indoor.