LifeSize Gateway-PRI, User Manual, Page: 109 / 196

Configuring the LifeSize Gateway 101
Configuring Gateway Settings
Table 3-18 Advanced Command Settings
Command Description
AddService2SrcNum Notifies the IP endpoint of the LifeSize Gateway
service number to which the ISDN-side endpoint
has called.
Parameters: disable/enable.
CallSignalPort Notifies the gatekeeper to which the LifeSize
Gateway is registered on which port to
communicate.
Parameters: 1000 to 3000.
Remarks: The number must be unique and not
used for any other purpose.
DownSpeed (unavailable in
Gateway-Serial)
Instructs the LifeSize Gateway to support
downspeeding.
Parameters: disable/enable.
EnhancedBillingForVoiceCalls
(unavailable in Gateway-Serial)
Instructs the LifeSize Gateway to support the
LifeSize Gatekeeper CDR
Real Connect Time
field. Real Connect Time indicates the actual time
at which an IP-to-ISDN voice call connects to the
ISDN terminal.
When disabled, the LifeSize Gatekeeper uses the
Connect Time field for CDR billing purposes.
Connect Time indicates the time at which the
Connect message is sent to the source endpoint.
Parameters: disable/enable.
Remarks: Default value is disable. Relevant to
voice calls only. Operational only when the
LifeSize Gateway is registered to a LifeSize
Gatekeeper working in Routed Mode.
ForceG711ForMcu Instructs the LifeSize Gateway to open only a
G.711 channel in LifeSize Gateway-to-MCU
calls.
Parameters: disable/enable.