Wireless Keyfob SKF2
The SKF2 is a Wireless Keyfob (Keychain Remote) with Stay and Away arming modes as well as panic
emergency mode. The Keyfob includes a status LED to indicate the current status of the system. The
status LED will only operate while in use (i.e. while pressing keys and for 20 seconds thereafter).
Programming
Your LifeShield system can support up to [4] Keyfobs in a single system. Each Keyfob must be registered
into the system before use. The Keyfob shipped with your Security Base was pre-registered before
shipment. Additional Keyfobs may be registered by using your Security Tablet, LifeShield web portal, or
LifeShield mobile application (collectively “apps”). To register a Keyfob, enter the Settings tab of the
respective apps, and select Add Device. Follow the on-screen prompts. When prompted, press the Stay,
Away, and * keys simultaneously on the Keyfob for 2 seconds. The Base will respond with audio
confirmation and the apps will show a success message. If the Keyfob fails to register with the Base, the
apps will show a failure message. Possible causes of registration failure include: Keyfob not powered,
wrong keys pressed, Keyfob out of range with Base, or too many Keyfobs already registered in LifeShield
System.
Using the Keyfob
The Keyfob must be used within good communications range of the Security Base. While range varies
with house construction, it is generally sufficient if the Keyfob is within 30 to 50 feet of the Base.
