7
8
1. Open the packed unit and take out the guard packet
(as shown in the above image) along with the blade & the table fan’s outer base.
2. Pick up the motor assembly along with the table fan stand.
3. Place the motor assembly along with the table fan’s stand in the outer
base ensuring to switch the position on the front. Use 5 screws to fix the motor assembly
to the outer base from the bottom.
4. Unscrew the 2 lock-nuts (as shown in the above image) from the motor shaft &
from the back cowl.
5. Fix the back guard and tighten the front lock-nut.
6. Slide the plastic blade on the motor shaft, and tighten the blade with the lock-nut by
rotating it in the anticlockwise direction.
7. Place the front guard and align the plastic ring with the front and back guard and
tighten the plastic ring screw.
8. The oscillation mechanism can be activated by pushing the oscillation knob downward
and the fan can be turned to a stationary position by gently pulling the oscillation knob.
9.
The speed of the fan can be regulated by the speed control switch fitted on the
plastic stand by pressing the relevant buttons.
10. Modes: 0: stop
1: Low
2: Medium
3: High
Assembly of the Wall Fan: